What are the different types of Scaffolding Tube and Coupler?

Tube lock Scaffolding is a structure widely used in most work sites. It represents a temporary and safe working platform to assist with construction, maintenance, repair, access, and audit.

When it comes to choosing the structure that fits the construction site, engineers or technicians play an important role. Their experience in this regard will ensure the best advice as an issue: type of work, conditions of the workplace, etc.

If we classify scaffolding types according to the fundamental mechanical differences of many models, we will say that there are 3 types of scaffolding used on construction sites, such as:

1. Tube and coupler scaffolding

2. H-frame / façade scaffolding

3. Multi-directional scaffolding

The pipe scaffold and coupler are designed as a temporary structure on the construction site.

Secondary and temporary work. It aims to support staff, ensure their safety and anyone else working on the platform.

The structure should be properly installed for the building. It is used to build, restore, wholly or partly erection methods. see more about adjustable screw jack

The system is made up of a number of elements:

1. steel tube

2. the clamp, allowing the tubes to couple up or any components to be joined

3. battens or working platforms

4. anchoring systems

5. base jacks (plates)

The tube is the main component of the system. Depending on how it is positioned, it takes the name of the standard / straight position (when placed vertically), the lever (when it forms a horizontal section), the ledger (when placed horizontally), and diagonally (when placed in an arc).

Coupler is a detailed component of the tube and can be made of steel or cast iron.

The name can change depending on the right angle of rotation (orthogonal), rotor, parallel and simple sleeves and sleeves.

Different types of Scaffolding: Tube and forged swivel Coupler

This is an example of orthogonal joint with tube and section of CONDOR tube and scaffold coupler. A vertical turn between the elements is allowed through friction.

Axial compression between two pipe elements is given by a simple coupler, whether of iron or cast iron. That allow continuity.

Calibrated elements can be placed at different angles by a rotary coupler, be it steel or cast iron. The elements can also be connected axially through a parallel coupling, whether iron or cast iron.

Make Battens (work platforms) or any wooden planks of the entire structure.

The decking panels are supposed to be horizontal elements designed as moving floors. They also play the role of transporting loads vertically through pipes on transistors, which are associated with uprisings.

This scaffold applies to a number of projects, such as civil and industrial buildings with solutions granted by ministerial licenses: the recovery of artifacts, support structures, hardening and reinforcement of unsafe buildings, maintenance and restoration of extremely complex or highly degraded architectural works.

Easy to use scaffolding accessories such as adjustable screw jack post, swivel coupler, gravlock coupler, 12 inch steel caster wheels and steel tube clamps available in AAIT Scaffold, the leading distributor of scaffolding equipment in the USA.