Do you want to make a custom scaffolding that meets your
needs? It is possible for you to assemble it yourself by equipping you
individually with the elements that compose it.
The multidirectional or fixed scaffolding or rolling
scaffolding proposed by the manufacturers, are not always adapted to the
specificities of your site.
Direct Mat proposes
all the accessories constituting a scaffolding:
·
The steel
tube :
It is the main element of your scaffolding. It defines its
limits by forming barriers that will secure the structure. The diameter of the
steel tube is usually 49 mm.
Its length varies from 1 to 6 meters.
·
The
adjustable clamping collar :
Its tightening can vary between 49X49, 49X60 or 49X76. It
allows to arrange and maintain the steel tubes. The collar is adjustable,
allowing you to vary the angle of the tubes at your leisure.
·
The
orthogonal clamping collar :
Its usefulness is the same as the swivel clamp except that
it is not swiveling and only allows angles to 90 C °. Its diameter is also
49X49.
The anchor tube :
It is used to make reservations in concrete and fix your
scaffolding to your facade. This is an essential element to ensure the stability
of your structure and greater security. The anchor tube has a hook. Its
diameter is 48.3 mm.
You will also find separately the anchor bolt ring that
accompanies the anchor tube.
Finally, if you want to equip all the elements allowing the
anchoring of your scaffolding, opt for the mooring kit including:
·
1 hook tube
·
1 necklace
·
1 ring stud
·
1 plastic pin for piton
·
The
mooring jack :
The mooring jack, allows to moor a scaffolding without
drilling your wall.
The frame 2 bars or 3 bars frame:
It constitutes the structure of your scaffolding. Depending
on the size of your scaffolding, you will choose the frame 2 bars or 3 bars.
To stabilize your structure, you will need a cross bar 2
bars or 3 bars cross .
Our standard scaffolding floors are made of steel or
aluminum. See more on: adjustable screw jack.
Comments
Post a Comment